Why does my Heta Scan-Line 900 tick?
The ticking sound in your Heta Stove is caused by normal expansion and contraction due to temperature changes. Ensure that the temperature in the combustion chamber is as constant as possible.
Why is my Heta Stove creaking?
The creaking sound in your Heta Stove indicates that the temperature in the combustion chamber is too high. Refer to the operating instructions for guidance.
Instructions on controlling combustion air via the handle for optimal burning and efficiency.
Method for starting a fire, stacking wood, and ensuring effective top-down combustion.
Procedure for adding wood when embers are present to maintain continuous burning.
Critical safety information on preventing flue gas explosions from incorrect firing and air supply.
Guidelines on approved wood types, moisture content, and storage for optimal performance and longevity.
Troubleshooting common problems like smoke, poor burning, soot build-up, and inefficient heat output.
Steps to take in case of a chimney fire, including closing air supply and contacting emergency services.
A comprehensive table identifying common faults, their causes, troubleshooting steps, and recommended solutions.
Procedures and regulations for safely connecting the stove to a brick or steel chimney system.
Specific clearance dimensions for safe installation of SL 900 series stoves according to EN 13240.
To Next Page
General