HETRONIC HH-M-MFSHL TS6P User Manual

YOUR #1 PARTNER IN RADIO REMOTE CONTROLS
Operator Manual
Hetronic USA
4300 Highline Blvd., Bldg. A
Oklahoma City, OK 73108
405-946-3574 Fax 405-946-3564
OPM_HH_S_0
6/05
www.hetronic.com
Hetronic Canada
45 Sinclair Avenue
Halton Hills, Ontario L7G 4X4
+1-800-816-4459 Fax +1-905-702-0501
© 2005 Hetronic, Inc.
All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language in any form by any means without the written permission of Hetronic.
MFS Hand Held Systems
HH-M-MFSHL TS5
HH-M-MFSHL TS6P
HH-L-MFSHL TS7P
PRELIMINARY COPY

HETRONIC HH-M-MFSHL TS6P Specifications

General

Brand	HETRONIC
Model	HH-M-MFSHL TS6P
Category	Remote Control
Language	English

Summary

INTRODUCTION

Unauthorized Replacement Parts

Before Attempting to Operate

Essential pre-operation checks including installation, safety precautions, and controls review.

HETRONIC SYSTEM COMPONENTS

SYSTEM OVERVIEW

E-Stop Function

Details the critical E-Stop function, its self-monitoring, and immediate impact on crane/machine motion.

SAFETY

Safety Alerts and Warnings

Explains safety alert symbols (Danger, Warning, Caution) and their meanings for hazard identification.

Operational Safety and Training

Advises on safe practices, legal compliance, operator training, and potential dangers in operation.

OPERATION AND WORK AREA SAFETY

Work Area Safety and Precautions

RECEIVER INSTALLATION

TRANSMITTER SETUP

Frequency and Address Settings

TRANSMITTER CONFIGURATION

Transmitter Handling and Testing

Instructions on proper transmitter handling and a critical warning about improper orientation causing unexpected responses.

SYSTEM TESTING

System Test Procedure

Step-by-step guide to testing the system, including receiver LED status, switch activation, and E-stop function.

OPERATION

Daily Operation Checks

Start-Up and E-Stop Procedure

Detailed steps for safely starting up the system and testing the E-stop function.

OPERATIONAL GUIDANCE

Emergency Stop and Safe Mode

Procedures for emergency stops, understanding safe mode, and critical warnings for system faults.

Transmitter Features and Operation

MAINTENANCE AND BATTERY MANAGEMENT

Changing and Disposing of Batteries

TROUBLESHOOTING

Troubleshooting Guide

Guides users through diagnosing and resolving system operational issues based on common problems and causes.