EasyManua.ls Logo

HETRONIC NOVA M - Technical Specification Transmitter Nova L

HETRONIC NOVA M
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
USER MANUAL | NOVA L
2
Transmitter Specifications
Transmitter NOVA L
Housing
Ergonomically designed Impact Resistant Polymer Composite
Environmental Protection
IP 65 (Exceeds Nema 12/13)
Weight
~0.745kg (1.6lbs) depending on configuration
Dimensions
Height: 235 mm
Width: 160 mm
Depth: 95 mm
Antenna
Internal as default, external via TNC connector
Power Supply
3.6V NiMH rechargeable battery
5 to 30V for cable control
Diagnostics
Status LED for operation and standard/advanced low battery
detection
Battery Operation Time
Min 12 hrs continuous transmission*
Control Configuration
2x Single/Dual/Triple axis cross joysticks
6x Single axis paddle levers
Combination of key switches, toggle switches, push buttons, rotary
switches, potentiometers and stop switches
Customized switches available upon request
Half or Full duplex feedback
Frequency Range
4xxMHz or 8xxMhz or 9xxMHz or 1.216GHz or 2.4GHz**
Power (RF Output)
Typically 10mW E.I.R.P
Typical Operating Range
150m (492ft) for 1GHz 10mW module (Line-of-Sight)
70m (150ft) for 2.4GHz 10mW module
Safety
20-bit programmable address concept with up to 1,000,000
combinations
Active & Passive Stop Function
Parity and Checksum
Operating Temperature Range
-25°C . . . 70°C (-13°F . . . 158°F)
Humidity Range
0 - 97% maximum non-condensing
Response Time
Less than 100 msec.
Accessories and options
Belly belt, neck belt, chest belt or shoulder bar
Cushion and customer logo option
Optional Custom housing colour
RS232/CAN Cable control
TFT
Back-lit monochrome TFT 120x32
Technical Specification Transmitter Nova L
*varies by transmitter configuration
** for full Channel Lists refer to Frequency Bands Radio Modules Charts
*** higher power available subject to country legislation
Monochrome LCD Display (optional)
There are several standard screens that are displayed on the LCD:
1. Software version
As soon as the display turns on the LCD type and software version installed in the controller are displayed.
2. Welcome screen
GRAPHIC LCD 120x32
SOFT. VERSION: 2.60

Table of Contents

Other manuals for HETRONIC NOVA M

Related product manuals