Need help?Do you have a question about the Hewalex GH26-P09 and is the answer not in the manual?
General| Brand | Hewalex |
|---|---|
| Model | GH26-P09 |
| Category | Controller |
| Language | English |
Identifies the controller's application in solar collector systems.
Covers the initial setup, calibration, and stand-by mode of the controller.
Describes the functions of the controller's touch keyboard keys.
Outlines how to navigate menus and operate the controller's functions.
Details controlling the solar collector pump for tap water heating.
Explains controlling solar collector and circulation pumps for tap water heating.
Covers controlling solar collector pump, circulation pump, and boiler for tap water heating.
Details controlling solar collector pump, circulation pump, and electrical heater for tap water heating.
Explains controlling solar collector pump, circulation pump, and heat pump for tap water heating.
Details controlling solar collector, circulation, fireplace, or solid-fuel boiler pumps.
Describes providing additional solar energy with a mixing pump for double heater systems.
Explains additional solar energy heating using a circulation return for double heater systems.
Covers tap and pool water heating with a three-way valve and pool pump control.
Details tap and pool water heating with an additional pump and pool pump control.
Explains double heater systems with a three-way valve and circulation pump control.
Covers double heater systems with an additional pump and circulation pump control.
Describes systems with a buffer tank for central heating installation cooperation.
Details heating combi heaters with boilers, electrical, or liquid-fuel boilers.
Explains tap water heating with solar collector pumps in various directions.
Covers double heater systems with a three-way valve and solar collector pumps.
Details tap water heating with a heater cooling system.
Explains tap water heating with solar, boiler, and solid-fuel boiler pump control.
Covers tap water heating with mixing pump and circulation return for boiler heating.
Guides on changing general control parameters for the installation.
Allows setting the working time program for the C circulation/pool pump.
Details setting parameters for the tap water circulation pump's operation.
Enables setting the working time program for the K boiler/heater/heat pump.
Defines the solidification temperature of the heat transfer fluid for calculations.
Covers setting parameters for the flow rate of the heat carrier.
Allows setting parameters for the collector pump's rotational speed control.
Guides on restoring the controller to its optimal factory default settings.
Allows setting the current date and time for the controller.
Adjusts display brightness and back-light time settings.
Enables or disables sound signals for controller keys and alarms.
Allows selection of the controller's display language version.
Covers setting parameters for controller communication via the RS485 port.
To Next Page
