English - 102 -
Voice Recognation
You can tap on the Microphone( ) widget
and manage your application, giving voice
commands such as “Portal!”, “Volume Up/
Down!”, “Programme Up/Down!”.
Note: This feature is only for android based
devices available.
Keyboard Page
The keyboard page can be opened in two
ways; by pressing the Keyboard( ) widget
on the application screen or automatically by
receiving a command from the TV.
Quick Standby
If the TV is turned o through the virtual
remote control in the Smart Center
application, it can be turned on again in the
same way. This feature can be enabled or
disabled by changing the Quickstandby
option in the Sysem>Options>More menu
of the TV.
Requirements
1. Smart TV
2. Network connection
3. Mobile Device based on Android or iOS
platform (Android OS 4.0 or higher; IOS
6 or higher version)
4. Smart Center app.(to be found on online
application stores based on Android and
iOS platforms)
5. Router modem
6. USB storage device in FAT32 format
(required for PVR feature, if available)
Notes:
For Android devices, Normal(mdpi), Large(hdpi) and
Extra Large(xhdpi) screen sizes are supported. Devices
with 3” or smaller screen sizes are not supported.
For iOS devices, all screen sizes are supported.
User interface of the Smart Center application is subject
to change according to version installed on your device.
J Cleaning and
Maintenance
•Always unplug the device before starting
cleaning and maintenance.
•Pay attention to the comments stated in
“Safety Information to Be Observed During
Cleaning and Maintenance”.
•Do not apply alcohol, solvent containing
chemicals, surface active agents such as
thinner, pesticides, air freshener, lubricant
or cleaning detergent to the product. These
chemicals might cause product to fade away
or crack or removal of labels or instructions.
•As surface or lenses can crack easily, use only
a soft cloth such as super thin fibre or cotton
cloth to clean the product. As product can
be easily scratched by foreign bodies, beat
out the dust before using the cloth.
Troubleshooting
When you detect an abnormal condition on
your device, you may try to resolve the issue
as per the description given on the table.
If your device does not resume normal ope-
ration still, contact Vestel Communication
Center.
You can find authorized services list and con-
tact information from the web site.
To Next Page
Loading...