Hi-level 48UHL950 - Sound Settings

English - 74 -
J TV Menu Contents
System - Picture Menu Contents
3D Settings
Press to view 3D settings.
Mode
You can change the picture mode to suit your preference or requirements. Picture
mode can be set to one of these options: Cinema, Game, Sports, Dynamic and
Natural.
Contrast
Adjusts the light and dark values on the screen.
Brightness
Adjusts the brightness values on the screen.
Sharpness
Sets the sharpness value for the objects displayed on the screen.
Colour
Sets the colour value, adjusting the colours.
Energy Saving
For setting the Energy Saving to Custom, Minimum, Medium, Maximum,
Auto, Screen O or O.
Note: Available options may dier depending on the selected Mode.
Backlight
This setting controls the backlight level. The backlight function will be inactive if
the Energy Saving is set to an option other then Custom.
Advanced Settings
Dynamic
Contrast
You can change the dynamic contrast ratio to desired value.
Noise
Reduction
If the signal is weak and the picture is noisy, use the Noise Reduction setting to
reduce the amount of noise.
Colour Temp
Sets the desired colour temperature value. Cool, Normal, Warm and Custom
options are available.
White Point
If the Colour Temp option is set as Custom, this setting will be available. Increase
the ‘warmth’ or ‘coolness’ of the picture by pressing Left or Right buttons.
Picture Zoom
Sets the desired image size format.
Film Mode
Films are recorded at a dierent number of frames per second to normal television
programmes. Turn this feature on when you are watching films to see the fast motion
scenes clearly.
Skin Tone
Skin tone can be changed between -5 and 5.
Colour Shift
Adjust the desired colour tone.
HDMI Full
Range
While watching from a HDMI source, this feature will be visible. You can use this
feature to enhance blackness in the picture.
PC Position
Appears only when the input source is set to VGA/PC.