English - 77 -
Auto TV OFF
Sets the desired time for the TV to automatically go into standby mode when not
being operated.
Biss Key
Biss is a satellite signal scrambling system that is used for some broadcasts. If you
need to enter Biss key on a broadcast, you can use this setting. Highlight Biss Key
and press OK to enter keys on the desired broadcast.
Store Mode
Select this mode for store display purposes. Whilst Store Mode is enabled, some
items in the TV menu may not be available.
Audio Video
Sharing
Audio Video Sharing feature allows you to share files stored on your smartphone
or tablet pc. If you have a compatible smartphone or tablet pc and the appropriate
software is installed, you can share/play photos on your TV. See instructions of your
sharing software for more information. Audio Video Sharing mode will not be
available with internet portal feature.
Power Up Mode
This setting configures the power up mode preference. Last State and Standby
options are available.
Enable or disable the virtual remote feature.
CEC
With this setting you can enable and disable CEC functionality completely. Press
Left or Right button to enable or disable the feature.
CEC Auto
Power On
This function allows the connected HDMI-CEC compatible device to turn on
the TV and switch to its input source automatically. Press Left or Right button to
enable or disable the feature.
Speakers
To hear the TV audio from the connected compatible audio device set as
Amplifier. You can use the remote control of the TV to control the volume of the
audio device.
FollowMe TV
Shows the status of the FollowMe TV feature. It will appear as On, if the feature
is in use.
Quickstandby
If this feature is enabled the TV can be turned on again through the virtual remote
in the Smart Center application if it is turned o through it. Press Left or Right
button to enable or disable the feature.
To Next Page
Loading...