Hi-Link HLK-SW16 - Modify Button’s Name; Set Inching Function; Set the Timer Function

深圳市海凌科电子有限公司 Shenzhen Hi-Link Electronic Co.,Ltd
Http://www.hlktech.com Tel:0755-23152658 Fax:0755-83575189
Shenzhen Hi-Link Electronic Co.,Ltd 13
Click the Advanced button to expand the interface,from where you can control
corresponding properties through the button.Shown as below:
7.Modify button’s name
For example,You want to change the Button 0 to T.V,firstly,you need to click on
the button 0,in the place here will show the name of this
button,，modify the 0 to TV ,Then click the button,after that you will
find the button 0 become to TV already.
8.Set inching function
Firstly choose one button you want to set for，click on the button ，
in the inching time item ,input the time you want to set,like
5 ，then click the button commit ，If the pop-up prompt window reads:出提
，it means you already set the inching function successfully.
When you open the button,it will close automatically after 5 second.
9. Set the timer function