Hi-Target V200 - WEB management system

V200 GNSS System User Manual
7
Data LED
Sampling interval >1s: Flashes at the sampling interval.
Sampling interval ≤1s: Flashes once per second.
Off
1. RTK mode: No correction data.
2. Static mode: Sampling has not started.
Satellite LED
Long-term lighting
Satellite is tracked.
Flash
Satellite is not tracked.
2.3 WEB management system
V200 has a built-in web management system that can be used to set the receiver's working mode,
data output, as well as view receiver information and satellite information. The receiver’s Wi-Fi name
is its S/N. You can connect it to a controller or phone (the default password is: 12345678) and then
input the IP address 192.168.20.1 into the browser to log onto the web management system.
Note: The web management system can only be visited when the receiver’s Bluetooth isn’t connected.
2.3.1 Main menu
After logging into the web management system, you can click Start to enter the main menu interface.
Each option of the main menu contains drop-down menus.
Figure 2-3-1 Home Figure 2-3-2 Main menu