Hi-Target V90 Plus - WIFI Password Setting

23
V90 Plus GNSS RTK System Getting Started
2.3 WIFI password setting
V90 Plus receiver can used as WiFi hotspot, support user-defined password (Factory default
password:12345678)
Cautions:
1.See WiFi factory default password in attached list1
2.If you forget your password, you can reset your password by”GNSS Receiver Manager V1.0.3”，
relative operation see in Appendix.
More than 4 satellites tracked successfully
Lose satellites and try re-track
1. mother board error resulting in no data output
while resetting receiver
2. mother board error resulting in no data output
while in static mode
Reset main board or static collecting error
(Insufficient storage space )
Always on
Slow flash
Off
Anomaly flash
of 3 lamps
Satellite led (green)