HID iCLASS R10 User Manual

Installation Guide
iCLASS™ Reader Models R10, R30, R40, RW300, RW400
An ASSA ABLOY Group company
ASSA ABLOY
_____________________________________________________________________________________________________
HID Corporation 9292 Jeronimo Road Irvine, CA 92618-1905 USA TEL (949) 598-1600 (800) 237-7769 FAX (949) 598-1690
Web page - www.hidcorp.com e-mail – tech@hidcorp.com
iClass
™ Reader Installation Manual 6090-900 Rev 8 Page
2
of
3
3- Preparing/Mounting
Install Mounting Plate to wall surface or back box, then reassemble reader (reverse Step 1 procedure).
Dimensions are in inches (centimeters).
R10 Mounting Plate R30/RW300 Mounting Plate R40/RW400 Mounting Plate
4- Connecting 5- Testing
Yellow *Speaker
Blue *Hold
•
Turn Power On
- watch the sign-on LED and hear the
speaker tones sequence.
Violet ***Open Collector
White Data 1
•
Use a Test Card
- watch for the LED flash and hear the
Speaker tone for each card read.
Green Data 0
Orange *Green LED
6- Optional Features
Brown *Red LED
Red +DC (10-16 VDC)
•
RS232 interface/Host Mode -
for applications requiring a
serial link. See Protocol Document 6090-902 for information
Black Ground
Gray ***RX (Serial Receive)
•
Open Collector Output –
controls an external device
(13.8VDC Max) operating in Host Mode only. See
iCLASS
Application Note for details
Red/Green ***DSR (Not Used)
Pink ***TX (Serial Transmit)
•
Configuration Options -
Configure LED, Speaker, and other
features. See How To Order Guide or
iCLASS
Application
Note for details

HID iCLASS R10 Specifications

General

Model	iCLASS R10
Category	Card Reader
Frequency	13.56 MHz
Color	Black
Card Compatibility	iCLASS, MIFARE, DESFire
Operating Humidity	5% to 95% non-condensing
Interface	Wiegand
Form Factor	Wall Mount
Power Supply	5-16 VDC
Warranty	Limited Lifetime Warranty