HID iCLASS SE U90 User Manual

hidglobal.com
iCLASS SE U90 Reader
User Guide
PLT-01952
Version: A.2
June 2014

HID iCLASS SE U90 Specifications

General

Brand	HID
Model	iCLASS SE U90
Category	Card Reader
Language	English

Summary

Overview

Features

Lists key features of the iCLASS SE U90 Reader, including security, standards, and connectivity.

Specifications

Details product electrical specifications, operating temperature, and cable length.

Planning

Installation Planning

Discusses reader radiation pattern and ideal environment for installation.

Location and Environment Considerations

Covers site selection, environmental factors, and potential interference for reader placement.

Lane Configuration, Heights, and Tools

Details lane setups, vehicle heights, mounting types, and installation tools.

Physical Installation

Reader Position and Mounting Surface

Specifies reader placement, height, and attachment to mounting surfaces.

Wiring and Backbox Installation

Details reader wiring connections and assembly into the backbox.

Initial Aiming and Examples

Guides on setting reader angle and provides visual installation examples.

Setup and Testing of the Reader

Reader Configuration Process

Outlines steps for configuring the reader via the U90 Reader Management GUI.

Installation Testing Procedures

Describes how to test the reader's performance after installation.

U90 Reader Management Configuration

Preparation and Initial Setup

Lists prerequisites and initial steps for accessing the reader configuration GUI.

GUI Navigation and General Information

Explains the GUI interface, login, and field status indicators.

Firmware and Reader Information

Covers firmware updates and viewing reader status details.

Reader Settings: General and I/O Tabs

Details configuration options for communication (General) and input/output functions (I/O).

Reader Settings: OSDP Protocol

Covers the configuration of the Open Supervised Device Protocol (OSDP).

Restore Default Settings

Restoring Network Configuration

Details the procedure for resetting the reader's network settings to factory defaults.

Resetting User Password

Explains how to reset the user access password for the management GUI using jumper pins.

Credential Location

Windshield Card Mount Installation

Provides instructions for installing the windshield card mount and notes on tinted windshields.

Troubleshooting

Card Read and Diagnostic LED Issues

Addresses problems with card reading, diagnostic LED behavior, and power status.

Read Range and GUI Problems

Covers issues with read range performance and graphic user interface connectivity.

Communication and Relay Malfunctions

Details troubleshooting for Wiegand data streams, acknowledgments, and relay operations.