Page 26
PLT-01952, Version: A.2 June 2015
5.10.1 To Change the Password
1. Select the Network Settings tab.
2. Enter a new password in the Change User Password field.
3. Re-enter the new password in the Confirm User Password field.
4. Click Apply Changes.
5. Test the new password, by clicking the Reboot System. Log into the reader with the new
password.
Note: If the password has been lost, see Section 6: Restore Default Settings for instructions to reset
the password to the default setting.
Confirm User Password Confirm the new password for the device.
Apply Changes
The Apply Changes button will apply any of the changes that have been made
to the configuration (fields will be green) and save them to the configuration.
Once saved the green fields should turn back to black.
Field Description
To Next Page
Loading...
