HID iCLASS SE U90 - Configurable Features

PLT-01545, Rev. A.4 iCLASS SE® U90 (U90.915 / U90.865)
April 20184
4. Power & Testing
Turn power on Basic test of a card
Configurable Features
 Open Collector Output - Controls an external device (16 VDC Max) operating in Host Mode only. Sink - 40mA /
Source - 1mA. See the iCLASS Application Note for details.
 Optical Tamper - Reader is configurable for Optical Tamper. Once activated, and when the reader is removed from
the mounting box, the Optical Tamper is activated. Contact HID Technical Support for Optical Tamper options. See
iCLASS SE U90 User Guide (PLT-01952).
 Hold Input - when asserted, this line either buers a card or disables a card read until released, as configured.
LED will be red
(under the trap door)
LED is under
the trap door
LED will be green
Note: This is tested with a card mounted in
a vehicle and driven by the reader.