Need help?Do you have a question about the Hifonics BRUTUS ELITE BRE100.2 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| RMS Power at 4 Ohms | 100W x 2 |
| RMS Power at 2 Ohms | 150W x 2 |
| Bridged RMS Power at 4 Ohms | 300W x 1 |
| Total Harmonic Distortion (THD) at RMS Output | <0.05% |
| Signal to Noise Ratio | >95dB |
| Frequency Response | 10 Hz - 30 kHz |
| Crossover Frequency | 50 Hz - 250 Hz |
| Bass Boost | 0-12dB |
| Minimum Impedance Unbridged | 2 Ohms |
| Minimum Impedance Bridged | 4 Ohms |
| RCA Inputs | Yes |
| Speaker Level Inputs | Yes |
| Preamp Outputs | Yes |
| Input Sensitivity | 200 mV - 6 V |
To Next Page