High Tech Pet Armor Flex - Draft Stopper Seal and Completion

16
STEP 30: Screw the Vacation Lock to your sliding glass door
Fasten the Vacation Lock to your sliding glass door using (2) #8 X 5/8 round head sheet metal screws.
STEP 31: Apply the Draft Stopper Seal
You will need to apply the Draft Stopper seal to the inside of your sliding glass door to seal the opening
between your sliding door and the stationary glass. Start at the top of your sliding glass door and apply
the seal removing the adhesive backing as you move down. When you reach the bottom, cut the
remaining seal material with scissors.
CONGRATULATIONS!
Your Power Pet patio pet door installation is complete. If you have any questions, comments or require
customer support call us at 1-800-255-1279 (M-F 8:30 AM – 4:00 PM Pacific time). Or email us at
support@HighTechPet.com. Thanks for choosing our pet door. We think you will find you have
purchased The Most Ingenious Pet Door on the Planet!
Fig 31A
Seal Placement
Fig 30B
Installed Lock Shown retracted
Fig 31B
Apply Seal From Top
Fig 30A
Screw the Vacation Lock into place
Fig 31C
Cut Seal at Bottom