Section 3 - CFR 650 Preparation
11. Inspect all the hydraulic motors,
cylinders and hoses.
Use a piece of cardboard or
heavy paper to check for leaks.
Do not use your hand. Wear
proper hand and eye protection
when searching for leaks.
Relieve pressure on the hydraulic
system before repairing, adjusting
or disconnecting.
- Visually inspect all the hydraulic hoses
and fittings.
- See Section 5 "Maintaining the
CFR 650" for conditions indicating
that replacement is needed.
- Ensure the proper size cylinder pins
are in place and secured.
12. Inspect the wheels and tires for
damage or foreign objects. Repair or
replace as necessary.
Check All Hydraulics
214086
Inspect Wheels and Tires
215126
Page 3-5
To Next Page
