Section 4 - Operating the CFR 650
4.0 OPERATING THE CFR 650
Do not allow anyone to ride on
the CFR 650.
- Falling from the machine can
cause injury
Do Not Enter the Tub While Parts
Are Rotating
- With Bale in Tub
- Without Bale in Tub
The Bale is unstable and may
cause entrapment.
Contact with the moving feed
mechanism will cause serious
injury or death.
Contact with the rotating flail drum
will cause serious injury or death.
Note: Use caution if entering the tub with
a bale in it - even after all rotation
has stopped. The bale is unstable.
Stay back from an operating
machine which can discharge
objects several feet.
Thrown material or objects leaving
the discharge area can cause
serious injury or death.
Do not operate within 100 ft (30m)
of any person.
1. Unlock the flail drum (1).
Pull the spring loaded pin out from the
processing chamber located at the front
of the machine.
Rotate to place the lock pin into the slot .
Unlock the Flail Drum
201213
Page 4-1
To Next Page
Loading...
