Control button : used for control on / off of meter output
Reset button: used for reset the total active energy to zero
Timing button: used for timing control on/off and time delay control on/off
1. time control :you can add the time which is control and which is control off
,if you do not select week , it will save as single time control . if you select
the week, it will save as cycle control .
2.
time-delay control : you can set 1minute to 24hour max to time delay
control. For example ,you can use delay time control to control off the
Battery car charging after 2hours .
the meter do not have time clock internal ,the time control is decide to cloud
serve, so make sure the meter connect the available WIFI network.
To Next Page
Loading...
Need help?
General
