Multi-spectrum Binocular User Manual
10
device.
Power Off
When the device is turned on, hold to power off the device.
Note
●
Power-off countdown will appear when you power off the device. You can press any
key to interrupt the countdown and cancel the power-off.
●
Automatic low battery power-off cannot be canceled.
Auto Power Off
You can set the auto power off time for your device.
Steps
1. Press to show the menu.
2. Go to Advanced Settings, and select General Settings.
3. Press or to select , and press to enter the configuration interface.
4. Press or to select the auto power off time as required, and press to
confirm.
5. Hold to save and exit.
Note
●
See the battery icon for the battery status. means the battery is fully charged,
means that the battery is low, and means the battery charging is abnormal.
●
When the low power note shows, charge the battery.
●
The auto power off countdown will start again when the device reenters the standby
mode or the device is restarted.
2.6 Auto Screen Off
Auto screen off function darkens the screen to save energy and increase battery time.
However, the device stays on and you can view the live view on HIKMICRO Sight app when
connecting the device to the app.
Steps
1. Enable auto screen off.
1). Press to show the menu.
2). Go to Advanced Settings, and press or to select .
To Next Page
Loading...
Need help?
General
