Thermal Monocular User Manual
8
Figure 2-4 Upgrade Firmware
Note
The upgrading operation may vary due to app updates. Please take the actual app version for
reference.
Upgrade Device via PC
Before You Start
Please get the upgrade package first.
Steps
1. Connect the device to your PC with cable.
2. Open the detected disk, copy the upgrade file and paste it to the root directory of the device.
3. Disconnect the device from your PC.
4. Reboot the device.
Result
The device upgrades automatically. The upgrading process will be displayed in the main interface.
To Next Page
Loading...
Need help?
General
