Hikmicro LYNX Series - 3.7 Digital Zoom; 3.8 Picture in Picture Mode

Thermal Monocular User Manual
13
3.7 Adjust Digital Zoom
You can zoom the image by using this function.
Press in the view mode, the live view switches between 1 ×, 2 ×, 4 × and 8 ×.
Note
This function varies according to different camera models.
3.8 Set Picture in Picture Mode
Steps
1. In the live view interface, hold to go to the menu.
2. Select , and press to enable or disable PIP mode. The details show in the upper center
of the view.
3. Hold to save the settings and exit.
Figure 3-5 Set Picture in Picture Mode