Name: Hikmicro LYNX Series
Brand: Hikmicro
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Thermal Monocular User Manual

2.2 Power On/Off

Power On

When the device is connected to cable or the battery is enough, hold for 2 seconds to

power on the device.

Power Off

When the device is turned on, hold for 2 seconds to power off the device.

Note

● Power-off countdown will appear when you power off the device. You can press any key to

interrupt the countdown and cancel the power-off.

● Automatic low battery power-off cannot be canceled.

Auto Power Off

You can set the auto power off time for your device.

Steps

1. Hold to go to the menu.

2. Select , and press to select the auto power off time as required.

3. Hold to save and exit.

Note

● See the battery icon for the battery status. means the battery is fully charged, and

means that the battery is low.

● When the low power note shows, charge the battery.

● The auto power off countdown will start again when the device exits standby mode or the

device is restarted.

2.3 Menu Description

When the device powers on, hold to display the menu.

Questions and Answers:

Need help?

Do you have a question about the Hikmicro LYNX Series and is the answer not in the manual?

Hikmicro LYNX Series Specifications

General