HIKVISION 24 series User Manual

- 18 -
No.
Abbrev.
Name
Description
1
PWR
Power indicator
When the switch is powered on, the
indicator is on.
2
SYS
System indicator
When the indicator is always on, the
system is being started up.
When the indicator flickers, the system
works well.
3
LINK/ACT
Port indicator
If the indicator is on in orange:
10/100Mbps,
If the indicator is on in green: 1000Mbps
If the indicator is off, the port is not
connected.
Table 5-1 Definition of 24 SWITCH Indicator
Copyright Claims
Without the written approval of the company , any person or group cannot transcribe, copy or
change partial or all contents of this manual, and must not broadcast it in any manner.
Trademark claims
Trademarks, product names, service names and company names, which are written in this manual
but do not belong to the company, belong to their owners respectively.
Disclaimer of warranty
provides no evident or hinted guarantee towards the contents of this manual. In no event, except
for the company’s breach of law, shall the company be liable for incidental, consequential, indirect
or special damages of any kind or for loss of profits or revenue or loss of business arising out of or
relating to this manual.
Note: Customer shall not be notified of this manual’s content amendments.

HIKVISION 24 series Specifications

General

Power over Ethernet (PoE)	Yes
PoE Standard	IEEE 802.3af/at
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Power Supply	100 to 240 VAC, 50/60 Hz
Port Type	Gigabit Ethernet