Need help?Do you have a question about the HIKVISION DS-3E0318P-E/M and is the answer not in the manual?
General| PoE Standard | IEEE 802.3af/at |
|---|---|
| PoE Power Budget | 130 W |
| MAC Address Table | 8K |
| Power Supply | AC 100~240V, 50/60Hz |
| Dimensions | 440mm |
Details on FCC compliance for the digital device, including limits for Class A digital devices and potential interference.
Specifies the two conditions under which the device complies with Part 15 of the FCC Rules.
Product conformity with harmonized European standards under EMC, LVD, and RoHS Directives, including WEEE and battery directives.
Statement confirming the device meets the requirements of CAN ICES-3 (A)/NMB-3(A) standards.
Introduces the unmanaged layer 2 100M long-range PoE switches, highlighting features like port count, extended mode, and reliability.
Details the items included in the product package, such as the switch, brackets, power cord, screws, and user manual.
Describes the front and rear panels of the switch models, including port layouts and indicator descriptions.
Provides essential safety precautions and tips before and during the installation process of the switch.
Outlines necessary conditions for temperature, humidity, and static electricity protection for optimal switch operation.
Details the steps for rack installation, including attaching brackets and securing the switch to the rack.
Explains the purpose of grounding and provides methods for grounding the switch, with or without a grounding bar.
Illustrates how to connect the switch to end devices using network cables via the RJ45 ports.
Guides on connecting the switch to devices using a dual-fiber SFP optical module and optical fiber.
Provides checks for power supply, cable connections, and lightning protection before powering on the switch.
Instructions on how to power on the switch using the attached power cord.
To Next Page