Need help?Do you have a question about the HIKVISION DS-3E0105P-E and is the answer not in the manual?
General| Cabling technology | 10/100Base-T(X) |
|---|---|
| Networking standards | IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Ethernet LAN (RJ-45) ports | 5 |
| Maximum data transfer rate | 100 Mbit/s |
| Input voltage | 51 V |
| Output current | 1.25 A |
| Power supply included | Yes |
| Power consumption (max) | 63 W |
| Surge protection voltage | 4 kV |
| Power consumption (typical) | 632 W |
| Number of power supply units | 1 |
| 10G support | No |
| Switch type | Unmanaged |
| Stackable | - |
| Product color | Blue |
| Installed SFP modules quantity | 0 |
| Basic switching RJ-45 Ethernet ports type | Fast Ethernet (10/100) |
| Total Power over Ethernet (PoE) budget | 58 W |
| Power over Ethernet (PoE) ports quantity | 4 |
| Power over Ethernet (PoE) power per port | 15.4 W |
| MAC address table | 1000 entries |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 93.3 mm |
|---|---|
| Width | 132 mm |
| Height | 27.6 mm |
| Weight | 299 g |
Provides a general description of the Hikvision DS-3E0105P-E/M unmanaged PoE switch and its capabilities.
Lists the essential items included with the PoE switch for setup and operation.
Details the physical appearance of the switch, focusing on the front panel.
Explains the function of each LED indicator on the switch for power, PoE, and link/activity status.
Provides essential notes for safe installation, including ESD precautions, voltage checks, and environmental requirements.
Details the steps for placing the switch correctly on a stable desktop, ensuring proper orientation.
Explains methods for grounding the switch using a grounding bar or by burying a grounding body for protection.
Guides on connecting RJ45 ports of the switch to peer devices, specifying uplink and downlink ports.
Details checks for power supply, cable connections, and grounding before powering up the switch.
Instructions on how to use the included power adapter to power up the switch correctly.
To Next Page