Need help?Do you have a question about the HIKVISION DS-3E0526P Series and is the answer not in the manual?
Details the applicability and content of the user manual for the PoE switch series.
Lists Hikvision's trademarks and acknowledges other mentioned trademarks.
Outlines the terms of use, warranties, and liability limitations for the product.
Provides FCC compliance details, including device testing and operational limits.
Specifies the two conditions under which the device complies with FCC Part 15.
Confirms compliance with EU directives for EMC, LVD, and RoHS, plus WEEE and battery directives.
States compliance with Industry Canada's standards for digital devices.
Defines symbols used in the document, such as NOTE, WARNING, and DANGER.
Describes the series of layer 2 gigabit PoE unmanaged switches and their features.
Lists the included accessories for the DS-3E0518P and DS-3E0526P switches.
Illustrates and labels the front panels of the DS-3E0518P and DS-3E0526P switches.
Explains the function of various status indicators on the switch.
Describes the function of Gigabit PoE ports for connecting PoE devices.
Details the Gigabit RJ45 port for network cable connections.
Explains the Gigabit SFP port for fiber optic connections.
Illustrates and labels the rear panel of the switches, including power and grounding.
Instructs on connecting the switch to a power socket using the provided power cord.
Provides essential safety precautions before and during switch installation.
Specifies environmental conditions required for optimal switch operation and life.
Details how temperature and humidity affect the switch's performance and lifespan.
Outlines measures to protect the device from static electricity damage.
Provides guidelines to protect the switch from lightning strikes and strong currents.
Recommends stable, well-ventilated locations and spacing for switch installation.
Details the procedure for rack installation of the switches.
Explains the purpose and methods of grounding the switch for protection.
Provides step-by-step instructions for grounding using a grounding bar.
Provides instructions for grounding the switch when a grounding bar is unavailable.
Guides on connecting network devices to the switch's PoE ports.
Details the process of connecting an SFP optical module to the switch.
Lists checks to perform on power supply and cabling before powering on the switch.
Instructs users to use the attached power cord to power on the switch.
To Next Page
General