Need help?Do you have a question about the HIKVISION DS-3E1318P-EI and is the answer not in the manual?
General| Switch type | - |
|---|---|
| Product color | Blue |
| Housing material | Metal |
| Input current | 2.5 A |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 250 W |
| Total Power over Ethernet (PoE) budget | 230 W |
| Power over Ethernet (PoE) ports quantity | 16 |
| Power over Ethernet (PoE) power per port | 30 W |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| 10G support | No |
| Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
| Combo SFP ports quantity | 2 |
| Installed SFP modules quantity | 0 |
| Basic switching RJ-45 Ethernet ports type | Fast Ethernet (10/100) |
| Forwarding rate | 5.3568 Mpps |
| MAC address table | 16000 entries |
Weight and Dimensions| Depth | 220.8 mm |
|---|---|
| Width | 440 mm |
| Height | 44 mm |
| Weight | 2590 g |
Covers critical safety instructions, dangers, and cautions for safe operation.
Describes the DS-3E1xxxP Series switches as Layer 2 PoE devices.
Procedure for attaching L-shaped brackets and fixing the switch to a rack.
Explains the importance of grounding and methods for connecting.
Steps for connecting SFP optical modules and fiber optic ports.
Instructions and precautions for powering on the switch.
Procedure for creating a password to activate inactive devices.
To Next Page