To Next Page

To Previous Page

User Manual of Network Camera

6.3.11 Configuring FTP Settings

Purpose:

You can configure the FTP server related information to enable the uploading of the

captured pictures to the FTP server. The captured pictures can be triggered by events

or a timing snapshot task.

Steps:

1. Enter the FTP Settings interface:

Configuration >Advanced Configuration > Network > FTP

Figure 6-20 FTP Settings

2. Configure the FTP settings; and the user name and password are required for

Directory: In the Directory Structure field, you can select the root directory,

parent directory and child directory. When the parent directory is selected, you

have the option to use the Device Name, Device Number or Device IP for the

name of the directory; and when the Child Directory is selected, you can use the

Camera Name or Camera No. as the name of the directory.

Upload type: To enable uploading the captured picture to the FTP server.

Anonymous Access to the FTP Server (in which case the user name and

password won’t be required.): Check the Anonymous checkbox to enable the

anonymous access to the FTP server.

Note: The anonymous access function must be supported by the FTP server.

HIKVISION DS-2CD20 Series User Manual

Questions and Answers: