HIKVISION DS-2CD20 Series User Manual

User Manual of Network Camera
74
 Day/Night Auto-Switch
Steps:
(1) Draw the detection area as in the normal configuration mode. Up to 8 areas are
supported.
(2) Select Auto-Switch for Switch Day and Night Settings.
Figure 6-44 Day/Night Auto-Switch
(3) Select the area by clicking the area No.
(4) Slide the cursor to adjust the sensitivity and proportion of object on the area for the
selected area in the daytime.
(5) Slide the cursor to adjust the sensitivity and proportion of object on the area for the
selected area at night.
(6) Set the arming schedule and linkage method as in the normal configuration mode.
(7) Click Save to save the settings.
 Day/Night Scheduled-Switch
(1) Draw the detection area as in the normal configuration mode. Up to 8 areas are
supported.
(2) Select Scheduled-Switch for Switch Day and Night Settings.

HIKVISION DS-2CD20 Series Specifications

General

Model	DS-2CD20 Series
Category	Security Camera
Image Sensor	1/3" Progressive Scan CMOS
Lens	Fixed
Focal Length	6 mm
IR Range	Up to 30 m
Video Compression	H.264
Network Interface	RJ45 10/100
Power Supply	12 VDC ± 25%/PoE (802.3af)
Operating Conditions	-30 °C to 60 °C, Humidity 95% or less (non-condensing)
Storage	MicroSD card slot (up to 128GB)