HIKVISION DS-2CD2332-I User Manual

Name: HIKVISION DS-2CD2332-I
Brand: HIKVISION
Rating: 4 (1 reviews)

74 pages

To Next Page

To Previous Page

User Manual of Network Camera

that has a time synchronization function, such as the server at the National Time

Center (IP Address: 210.72.145.44). If the camera is set in a customized network, NTP

software can be used to establish a NTP server for time synchronization.

 Configuring Time Synchronization Manually

Enable the Manual Time Sync function and then click to set the system time

from the pop-up calendar.

Note: You can also check the Sync with local time checkbox to synchronize the time

of the camera with the time of your computer.

Figure 5-5 Time Sync Manually

 Check to enable the DST function and Set the date of the DST

period. (Optional, configure if necessary.)

Figure 5-6 DST Settings

2. Click to save the settings.

5.3 Configuring Network Settings

5.3.1 Configuring TCP/IP Settings

Purpose:

TCP/IP settings must be properly configured before you operate the camera over

network.

Steps:

1. Enter TCP/IP Settings interface:

Configuration > Basic Configuration > Network > TCP/IP

Or Configuration > Advanced Configuration > Network > TCP/IP

Other manuals for HIKVISION DS-2CD2332-I

Need help?

Do you have a question about the HIKVISION DS-2CD2332-I and is the answer not in the manual?

General

Type	IP security camera
PTZ control	-
Connectivity technology	Wired
Wide Dynamic Range (WDR)	Yes
Form factor	Dome
Mounting type	Ceiling/wall
Product color	White
International Protection (IP) code	IP66
Total megapixels	3 MP
Maximum resolution	2048 x 1536 pixels
Supported video modes	1080p
Video formats supported	H.264, M-JPEG
Supported graphics resolutions	1280 x 960, 1536 x 2048, 1280 x 720 (HD 720)
Pan range	0 - 360 °
Tilt angle range	0 - 75 °
Angle of rotation	360 °
Camera shutter type	Electronic
Camera shutter speed	1/100000 s
Minimum illumination	0 lx
Field of view (FOV) angle	75.8 °
Sensor type	CMOS
Optical sensor size	1/3 \
Optical zoom	- x
Fixed focal length	- mm
LED type	IR
Night vision distance	30 m
Wi-Fi	No
Cabling technology	10/100Base-T(X)
Supported network protocols	TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE, SMTP, NTP, SNMP, HTTPS, FTP, 802.1X, Qos
Interface	RJ-45
Ethernet LAN (RJ-45) ports	1
Power source type	PoE
Power consumption (max)	5.5 W
Power consumption (typical)	7.5 W
Operating temperature (T-T)	-30 - 60 °C
Operating relative humidity (H-H)	0 - 95 %