Network Camera User Manual
164
responsibility of the installer and/or end-user.
(4) Click Save to add the network disk.
2. Initialize the added network disk.
(1) Enter the HDD Settings interface, Configuration > Storage > Storage
Management > HDD Management, in which you can view the capacity,
free space, status, type and property of the disk.
Storage Management Interface
(2) If the status of the disk is Uninitialized, check the corresponding checkbox
to select the disk and click Format to start initializing the disk.
When the initialization completed, the status of disk will become Normal.
View Disk Status
3. Define the quota for record and pictures.
(1) Input the quota percentage for picture and for record.
(2) Click Save and refresh the browser page to activate the settings.
To Next Page
Loading...
