EasyManuals Logo
Home>HIKVISION>Security Camera>DS-2CD2732F-IS

HIKVISION DS-2CD2732F-IS Installation Manual

HIKVISION DS-2CD2732F-IS
131 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
Installation Manual of Network Camera
3
Safety Instruction
These instructions are intended to ensure that the user can use the product correctly to avoid danger
or property loss.
The precaution measure is divided into ‘Warnings’ and ‘Cautions’:
Warnings: Serious injury or death may be caused if any of these warnings are neglected.
Cautions: Injury or equipment damage may be caused if any of these cautions are neglected.
Warnings Follow these safeguards to
prevent serious injury or death.
Cautions Follow these precautions to
prevent potential injury or material
damage.
Warnings:
Please adopt the power adapter which can meet the safety extra low voltage (SELV) standard.
And source with 12 VDC or 24 VAC (depending on models) according to the IEC60950-1 and
Limited Power Source standard.
If the product does not work properly, please contact your dealer or the nearest service center.
Never attempt to disassemble the camera yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)
To reduce the risk of fire or electrical shock, do not expose this product to rain or moisture.
This installation should be made by a qualified service person and should conform to all the local
codes.
Please install blackouts equipment into the power supply circuit for convenient supply
interruption.
Please make sure that the ceiling can support more than 50(N) Newton gravities if the camera is
fixed to the ceiling.
If the product does not work properly, please contact your dealer or the nearest service center.
Never attempt to disassemble the camera yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)
Lo-Call 1890 866 900
www.cctvireland.ie
shop@cctvireland.ie

Table of Contents

Other manuals for HIKVISION DS-2CD2732F-IS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-2CD2732F-IS and is the answer not in the manual?

HIKVISION DS-2CD2732F-IS Specifications

General IconGeneral
TypeIP security camera
PTZ control-
Placement supportedOutdoor
Connectivity technologyWired
Wide Dynamic Range (WDR)Yes
Form factorDome
Mounting typeCeiling
Product colorWhite
Protection featuresVandal proof
International Protection (IP) codeIP66
Total megapixels3 MP
Maximum resolution2048 x 1536 pixels
Supported video modes1080p, 720p
Video formats supportedH.264, M-JPEG
Analog signal format systemNTSC, PAL
Supported graphics resolutions1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Pan range0 - 355 °
Tilt angle range0 - 75 °
Angle of rotation355 °
Camera shutter speed1/25(1/30) - 1/100.000 s
Minimum illumination0.07 lx
Sensor typeCMOS
Optical sensor size1/3 \
Optical zoom- x
Lens diameter14 mm
Focal length range- mm
Password protection typeUser
Built-in HDDNo
Compatible memory cardsSD, SDHC, SDXC
Maximum memory card size64 GB
LED typeIR
Night vision distance20 m
Cabling technology10/100Base-T(X)
Supported network protocolsTCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
InterfaceRJ-45
Ethernet LAN (RJ-45) ports1
AC input voltage12 V
Power source typePoE
Power consumption (max)5.5 W
Operating temperature (T-T)-30 - 60 °C
Operating relative humidity (H-H)0 - 95 %
Weight and Dimensions IconWeight and Dimensions
Width139.9 mm
Height99.9 mm
Weight1000 g
Diameter140 mm

Related product manuals