To Next PageTo Next Page
Need help?Do you have a question about the HIKVISION DS-2CE11D8T-PIRL and is the answer not in the manual?
General| Full HD | Yes |
|---|---|
| Total megapixels | 2 MP |
| Maximum resolution | 1920 x 1080 pixels |
| Image quality adjustment | Brightness, Sharpness |
| Analog signal format system | NTSC, PAL |
| Fixed focal length | 2.8 mm |
| Number of cameras | 1 |
| Pan range | 0 - 360 ° |
| White balance | ATW, Manual |
| Tilt angle range | 0 - 180 ° |
| Angle of rotation | 360 ° |
| Camera shutter speed | 1/50000 - 1/25 s |
| Minimum illumination | 0 lx |
| Type | CCTV security camera |
| Languages support | CHI (TR), ENG |
| Number of languages | 2 |
| Placement supported | Indoor & outdoor |
| Connectivity technology | Wired |
| Sensor type | CMOS |
| Lens mount interface | M12 |
| Interface | BNC |
| Built-in HDD | No |
| LED type | IR |
| Night vision distance | 20 m |
| Form factor | Bullet |
| Mounting type | Ceiling/wall |
| Product color | White |
| Housing material | Metal |
| International Protection (IP) code | IP67 |
| Operating temperature (T-T) | -40 - 60 °C |
| DC output voltage | 12 |
| Power source type | DC |
| Power consumption (max) | 4.5 W |
| Power over Ethernet (PoE) | - |
Weight and Dimensions| Depth | 68 mm |
|---|---|
| Width | 70 mm |
| Height | 179.8 mm |
| Weight | 345 g |
Provides safeguards to prevent serious injury or death, covering electrical safety and device handling.
Outlines precautions to prevent potential injury or material damage, including handling and environmental factors.
Guides on installing the Type I camera, including mounting options and initial setup checks.
Step-by-step instructions for mounting the camera on ceilings or walls without using a junction box.
Detailed steps for mounting the camera using a junction box for a cleaner installation.
Provides installation guidance specific to the Type II bullet camera model.
Instructions for Type II camera mounting on ceilings/walls without a junction box.
