HIKVISION DS-2CE56D8T-IT3F

Adjusting Screw
0° to 355°
0° to 75°
0° to 355°
Figure 2-14 Type I Camera 2-Axis Adjustment
1). Loosen the tilt adjusting screw to adjust the tilt
position [0° to 75°].
2). Hold the black liner to adjust the pan position [0°
to 355°].
3). Hold the camera body to adjust the rotation
position [0° to 355°].
8. Reinstall the bubble, and tighten the screws.
Figure 2-15 Bubble Reinstallation