UM DS-2CE7xH0T-ITxxx Series Turret 052020NA 8
Figure 5, Drill Template
5. Attach the mounting base to the ceiling, and
secure it with supplied screws. For a concrete
ceiling, first mount the expansion bolts.
Figure 6, Attach the Mounting Base to the Ceiling
6. Route cables through the cable hole or the side
opening.
7. Attach the camera back to the mounting base,
and secure it.
Figure 7, Install the Camera Back
8. Connect the corresponding power cord and video
cable.
9. Power on the camera to check if the image on the
monitor is at an optimum angle. If not, adjust the
To Next Page
Loading...
