© Hikvision
Video Adjustment
Note:
The functions vary depending on different camera models.
Mirror
If you turn the MIRROR function on, the image will be flipped. It is like the image in the mirror.
The flip direction can be set to OFF or CENTER.
Video Standard
You can set the Video Standard to 50 Hz (PAL) or 60 Hz (NTSC) according to the video system in
your country.
Capture Mode
You can disable this function or select the capture mode from the list.
Other
The functions vary depending on different camera models.
Lens Initialization
The lens operates the movements for initialization when you enable Lens Initialization.
Zoom Limit
You can set Zoom Limit value to limit the maximum value of zooming. The value can be selected
from the list.
Local Output
You can select the output mode to ON or OFF.
Note:
These functions vary depending on the models of speed dome.
6.3.2 Configuring OSD Settings
Purpose:
The camera supports following on screen displays:
Time: Supports for time display.
Camera Name: Identifies the name of camera.
You can customize the on screen display of time.
Steps:
1. Enter the OSD settings interface:
Configuration > Image > OSD Settings
2. Check the corresponding checkbox to select the display of camera name, date or week if
required.
3. Edit the camera name in the text field of Camera Name.
4. Select from the dropdown list to set the time format, date format, display mode, OSD size，
Font color and alignment.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
