EasyManuals Logo

HIKVISION DS-2DE4225IW-DE User Manual

HIKVISION DS-2DE4225IW-DE
125 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
© Hikvision
2.1.3 (Optional) Setting Security Question
Security question is used to reset the admin password when admin user forgets the password.
Admin user can follow the pop-up window to complete security question settings during camera
activation. Or, admin user can go to User Management interface to set up the function.
2.2 Setting the Network Camera over the WAN
Purpose:
This section explains how to connect the network camera to the WAN with a static IP or a
dynamic IP.
2.2.1 Static IP Connection
Before you start:
Apply a static IP from an ISP (Internet Service Provider). With the static IP address, you can
connect the network camera via a router or connect it to the WAN directly.
Connecting the network camera via a router
Steps:
1. Connect the network camera to the router.
2. Assign a LAN IP address, the subnet mask and the gateway. Refer to Section 2.1.2 for detailed
IP address configuration of the camera.
3. Save the static IP in the router.
4. Set port mapping, E.g., 80, 8000 and 554 ports. The steps for port mapping vary depending
on different routers. Call the router manufacturer for assistance with port mapping.
5. Visit the network camera through a web browser or the client software over the internet.
Network
Speed Dome
Network
Cable
Router with Static IP
PC
Network
Cable
Network
Cable
Internet
Figure 2-10 Accessing the Camera through Router with Static IP
Connecting the network camera with static IP directly
You can also save the static IP in the camera and directly connect it to the internet without using
a router. Refer to Section 2.1.2 for detailed IP address configuration of the camera.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-2DE4225IW-DE and is the answer not in the manual?

HIKVISION DS-2DE4225IW-DE Specifications

General IconGeneral
TypeIP security camera
Placement supportedIndoor & outdoor
Connectivity technologyWired
Wide Dynamic Range (WDR)Yes
Sensor typeCMOS
Optical sensor size1/2.8 \
Digital zoom16 x
Optical zoom25 x
Focal length range- mm
Maximum aperture number3.8
Minimum aperture number1.6
Pan range0 - 360 °
Pan speed80 °/sec
White balanceATW, Auto, Fluorescent, Indoor, Manual, Outdoor, Sodium lamp
Tilt angle range-15 - 90 °
Camera shutter speed1/30000 - 1 s
Minimum illumination0 lx
Preset programs quantity300
Total megapixels2 MP
Gain control typeAuto/Manual
Maximum resolution1920 x 1080 pixels
Video compression formatsH.264, H.264+, H.265, H.265+, M-JPEG
Supported graphics resolutions352 x 240, 352 x 288, 640 x 480 (VGA), 704 x 480, 704 x 576, 1280 x 720 (HD 720), 1280 x 960, 1920 x 1080 (HD 1080)
LED typeIR
Night vision distance100 m
Number of cameras1
DC output voltage12
Power source typeDC, PoE
Power consumption (Power over Ethernet (PoE))18 W
Built-in HDDNo
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, MicroSDXC
Maximum memory card size256 GB
Behavior analysisIntrusion detection, Line crossing detection, Object removal detection, Unattended baggage detection
Security algorithms802.1x RADIUS
Intelligent Video Surveillance (IVS) system featuresFace detection
Bluetooth-
Number of users32 user(s)
Networking standardsIEEE 802.3at
Supported network protocolsIPv4/IPv6, HTTP, HTTPS, 802.1x, Qos, FTP, SMTP, UPnP, SNMP, DNS, DDNS, NTP, RTSP, RTCP, RTP, TCP/IP, UDP, IGMP, ICMP, DHCP, PPPoE, Bonjour
Operating temperature (T-T)-30 - 65 °C
Form factorDome
Mounting typeCeiling/wall
Product colorWhite
International Protection (IP) codeIP66
Weight and Dimensions IconWeight and Dimensions
Height290 mm
Weight2000 g
Diameter164.5 mm

Related product manuals