HIKVISION DS-2DF8C842IXS-AELW - Page 21

4.
Click Area Sengs to set the detecon rule.
5.
Select a detecon scene from the drop-down list and change the Scene Name as required.
The device supports mulple detecon scenes with independent detecon parameters.
6.
Draw lane areas in the scene.
1) Click Lock to avoid accidental PTZ changing during conguraon.
2) Adjust the pan, lt, and zoom posion to obtain the target scene.
3) Select the Total Number of the Lanes according to the actual lane number you want to
monitor in the scene.
Yellow lane lines, a blue
detecon line, and a red frame are displayed on live image.
4) Adjust the zoom rao of the device so that the size of the vehicle in the image is close to that
of the red frame. The
posion of red frame is adjustable.
5) Click and drag the lane lines or the endpoints to set the posions according to the actual lane
lines on the road.
6)
Oponal: Click and drag the blue detecon line to adjust the posion. Vehicle detecon is
triggered when target vehicles hit the line.
7) Click Save.
7.
Oponal: Repeat to set other detecon scenes if needed.
8.
Set detecon parameters.
Country/Region
Select according to the device locaon. License plate rules of the selected country or region
are
acvated.
Detecon Mode
The device is able to detect vehicles and license plates. With the detecon mode sengs, the
detecon priority of the vehicle and license plate can be adjusted on demand.
License Plate & Vehicle
The vehicle and license plates are detected simultaneously. The device takes a capture
either when it detects a vehicle or a license plate.
Vehicle Priority
The device takes a capture only when it detects a vehicle.
Remove Duplicated License Plates
The
funcon is used to avoid repeated captures of the same license plate. Set the Time
Interval. During the set interval, the same license plate is only captured once.
9.
Click Save to nish area sengs.
10.
Set the arming schedule for allowlist, blocklist, and other list respecvely.
1) Click Arming Schedule.
2) Select a
detecon scene and draw the me bar in the me table. Dierent scenes are
marked with dierent colors on schedule.
3)
Oponal: Move the mouse to the end of each day, a copy icon pops up, and you can click to
copy the current sengs to other days.
4) Click Save aer nishing schedule sengs.
Network Speed Dome User Manual
9