HIKVISION DS-2DF8C842IXS-AELW User Manual

3.5.3 View Face Comparison Result
Steps
1.
Go to
Applicaon.
2.
Set search condion and click Counng.
Matched results are shown in Face Picture Comparison Stascs area.
3.6 Capture Target with Feature
It is to detect, capture and upload features of targets in mulple types, such as human face and
human body.
Note
For certain device models, you need to select Face+Human on VCA Resource page rst. See
Allocate VCA Resource for instrucons.
3.6.1 Set Detecon Rule
Aer the rules and algorithm parameters are set, the device captures targets of mulple types and
triggers linkage acons automacally.
Steps
1.
Go to Open
Plaorm → Capture Target with Feature → Rule .
2.
Check Enable.
3.
Select a conguraon mode.
Normal
One detecon scene is allowed to set. The device captures targets in the scene in
the set arming schedule.
See Normal Mode Sengs for details.
Expert The device can patrol among the detecon scenes and capture target images.
Detecon scenes and patrol schedule should be set in advance.
See Expert Mode Sengs for details.
4.
Click Save.
What to do next
Go to Picture to search and view the captured pictures.
Go to Smart Display to see currently captured target pictures.
Network Speed Dome User Manual
19

HIKVISION DS-2DF8C842IXS-AELW Specifications

General

Camera Type	PTZ
Max. Resolution	3840 × 2160
Tilt Range	-15° to 90°
Preset	256
Ingress Protection	IP66
Image Sensor	1/1.8" Progressive Scan CMOS
Zoom Speed	3.5 s (optical zoom, wide to tele)
Min. Illumination	0 Lux with IR
Pan Range	360°
Tilt Speed	0.1° - 120°/s
Video Compression	H.265/H.264/MJPEG
Audio Compression	G.711/G.726/PCM
Network Interface	RJ45 10M/100M Ethernet port
Power Supply	24 V AC
Operating Conditions	-40 °C to +70 °C; Humidity 95% or less (non-condensing)
Dimensions	Φ 220 mm
Bit Rate	32 Kbps to 16 Mbps
Frame Rate	50 Hz: 25 fps (3840 × 2160); 60 Hz: 30 fps (3840 × 2160)