HIKVISION DS-2DP1618ZIXS-DE - Page 113

User Manual of PanoVu Series Network Camera
106
 Restoring Default Settings
Steps:
1. Enter the Maintenance interface:
Configuration > System > Maintenance > Upgrade & Maintenance:
2. Click or to restore the default settings.
Note:
Clicking button will restore all the parameters to default settings including the IP
address and user information. Use this button with caution.
Figure 7-9 Restore Default Settings
 Exporting Configuration File
Steps:
1. Enter the Maintenance interface:
Configuration > System > Maintenance > Upgrade & Maintenance
2. Click to select the directory as the saving path to start exporting configuration
file.
 Importing Configuration File
Steps:
1. Enter the Maintenance interface:
Configuration > System > Maintenance > Upgrade & Maintenance
2. Click to select the local configuration file and then click to start importing
configuration file.
Figure 7-10 Import Configuration File
Note:
You need to reboot the camera after importing configuration file.
 Upgrading the System
Steps:
1. Enter the Upgrade & Maintenance interface:
Configuration >System > Maintenance > Upgrade & Maintenance
2. Select Firmware or Firmware Directory.