You can check desired items (Device No., Camera Info. and Capture Time) and adjust their order
to display on captured pictures by .
See Set Camera Info to set Device No. and Camera Info.
3.4.4 Face Capture Algorithm Parameters
It is used to set and opmize the parameters of the algorithm library for face capture.
Face Capture Version
It refers to the current algorithm version, which cannot be edited.
Face Picture Comparison Version
It refers to the current algorithm version, which cannot be edited.
Restore Defaults
Click Restore to restore all the sengs in advanced conguraon to the factory default.
Capture Parameters
Upload Feature
Feature stands for the feature informaon the algorithm can tell from face pictures. For
example, gender, facial expression, wearing glasses or not, etc. Check the
funcon to upload the
informaon.
Best Shot
The device captures the target picture with the highest score aer seng the parameters.
Capture Times
It refers to the capture
mes a face will be captured during its stay in the detecon area.
Capture Threshold
It refers for the quality of face to trigger capture and alarm. Higher value means beer quality
should be met to trigger capture and alarm.
Remove Duplicated Faces
This funcon can lter out repeated captures of certain face.
Note
Remove Duplicated Faces, Face Picture Comparison, and Face Modeling cannot be turned on
simultaneously, and the device can support only one funcon at a me. The last one you
turned on can eventually take eect, and the other two turn o automacally.
Similarity Threshold for Duplicates Removing
Network Speed Dome User Manual
15