Note
Remove Duplicated Faces, Face Picture Comparison, and Face Modeling cannot be turned on
simultaneously, and the device can support only one funcon at a me. The last one you
turned on can eventually take eect, and the other two turn o automacally.
Similarity Threshold for Duplicates Removing
It is the similarity between the newly captured face and the picture in the duplicates
removing library. When the similarity is higher than the value you set, the captured picture is
regarded as a duplicated face and will be dropped.
Duplicates Removing Library Grading Threshold
It is the face grading threshold that triggers duplicates checking. When the face grading is
higher than the set value, the captured face is compared with the face pictures that are
already in the duplicates removing library.
Duplicates Removing Library Update Time
Every face picture is kept in the duplicates removing library for the set update
me.
Quick Shot
The device captures the target picture once the score of the captured face exceeds the Quick
Shot Threshold during the Max. Capture Interval. Otherwise, the device selects and uploads
the picture with the highest score during the Max. Capture Interval.
Quick Shot Threshold
It refers to the quality of face to trigger quick shot.
Max. Capture Interval
It describes the max.
me occupaon for one quick shot.
Capture Times
It refers to the capture mes a face will be captured during its stay in the congured area.
Unlimited
The device keeps capturing the target face, which exceeds the Quick Shot Threshold during
the Max. Capture Interval.
Limited
The device captures the target face according to the set
mes.
Face Exposure
Enable the funcon, and the device automacally adjusts exposure level when human faces
appear in the scene.
Reference Brightness
Network Speed Dome User Manual
22
To Next Page
Loading...
Need help?
General
