HIKVISION DS-2TD2466-50Y User Manual

Cable Description
Name
Description
Network Interface
Connect to the LAN. PoE+ supported.
Power Interface
12V DC power supply. Make sure that
the positive/negative terminals are
connected correctly.
Alarm Interface
Alarm In: IN and G,
Alarm Out: 1A and 1B.
BNC Interface
Local video signal output
Audio Interface
Audio In: Pickup
Audio Out: Loudspeaker
● The cables may vary according to different models.
Here we list all types of cables for reference. Take the
actual product for the cables
● To reset the camera to default parameters, you need
to press and hold the RESET button and power on the
camera. After the power on of the camera, you must
still press and hold the Reset button for about 10
seconds.

HIKVISION DS-2TD2466-50Y Specifications

General

Brand	HIKVISION
Model	DS-2TD2466-50Y
Category	Security Camera
Language	English