3.2 Activating the Camera
You are required to activate the camera first by setting a strong
password for it before you can use the camera.
Activation via Web Browser, Activation via SADP, and Activation
via Client Software are all supported. We will take activation via
SADP software and Activation via Web Browser as examples to
introduce the camera activation. Please refer to the User
Manual of Network Camera for Activation via Client Software.
3.2.1 Activation via Web Browser
Steps:
1. Power on the camera, and connect the camera to the
network.
2. Input the IP address into the address bar of the web browser,
and click Enter to enter the activation interface.
Notes:
The default IP address of the camera is 192.168.1.64.
For the camera enables the DHCP by default, you need to
activate the camera via SADP software and search the IP
address.
Activation Interface(Web)
To Next Page
Loading...
Need help?
General
