and provide clear images with details.
You can enable or disable the WDR function as shown in Figure 7-43. The wide dynamic
level ranges from 0 to 100.
Figure 7-43 WDR
This function varies depending on the models of speed dome.
HLC
HLC (High Light Compensation) makes the camera identify and suppress the strong light
sources that usually flare across a scene. This makes it possible to see the detail of the image
that would normally be hidden.
White Balance
The White Balance mode can be set to Auto, MWB, Outdoor, Indoor, Fluorescent Lamp,
Sodium Lamp and Auto-Tracking.
Auto:
In Auto mode, the camera retains color balance automatically according to the current color
temperature.
Manual White Balance:
In MWB mode, you can adjust the color temperature manually to meet your own demand
as shown in Figure 7-44.
Figure 7-44 Manual White Balance
Outdoor
You can select this mode when the speed dome is installed in outdoor environment.
Indoor
You can select this mode when the speed dome is installed in indoor environment.
Fluorescent Lamp
You can select this mode when there are fluorescent lamps installed near the speed dome.
Sodium Lamp
You can select this mode when there are sodium lamps installed near the speed dome.
Auto-Tracking
In Auto-Tracking mode, white balance is continuously being adjusted in real-time according
to the color temperature of the scene illumination.
To Next Page
Loading...
Need help?
General
