Figure 7-68 Log Searching Interface
2. Set the log search conditions to specify the search, including the Major Type, Minor Type,
Start Time and End Time as shown in Figure 7-68.
3. Click to search log files. The matched log files will be displayed on the Log
interface.
4. To export the log files, click Save Log to save the log files in your computer.
System Service
Steps:
1. Enter the interface of configuring the remote connection:
Configuration > System > Maintenance > System Service
2. Check the checkbox of Enable Supplement Light on your demand.
3. Check the checkbox of Enable Automatic De-icing on your demand.
The de-icing heater is only supported under POE+, 24VAC, or 12VDC power supply.
4. Select the power saving mode between manual and scheduled.
Power Saving Mode: Select power saving mode as manual, and you can turn on and off
the power saving function. Select power saving mode as scheduled, you can customize
the schedule for enabling the automatic de-icing function.
Electric Current Limit: The function
To Next Page
Loading...
Need help?
General
