HIKVISION DS-2XE62 2F-IS Series User Manual

Network Bullet Camera·Quick Start Guide
25
25
Steps:
1. Run the SADP software.
2. Select an active device.
3. Change the device IP address to the same subnet with your
computer by either modifying the IP address manually or checking
the checkbox of Enable DHCP.
Modify the IP Address Figure 4-5

HIKVISION DS-2XE62 2F-IS Series Specifications

General

Brand	HIKVISION
Model	DS-2XE62 2F-IS Series
Category	Security Camera
Language	English