HIKVISION DS-2XE62 2F-IS Series User Manual

Network Bullet Camera·Quick Start Guide
34
34
6.4 Initializing the Memory Card
Check the memory card status by tapping on the Storage Status in
the Device Settings interface.
If the memory card status displays as Uninitialized, tap to initialize
it. The status will then change to Normal. You can then start
recording any event triggered video in the camera such as motion
detection.

HIKVISION DS-2XE62 2F-IS Series Specifications

General

Brand	HIKVISION
Model	DS-2XE62 2F-IS Series
Category	Security Camera
Language	English