User Manual of DS-7000HI-S Series Net DVR
Page 33
a) SATA HDD for auto backup needs to be connected to the 1
st
SATA interface;
b) SATA HDD for auto backup needs to be formatted by selecting “format” in the auto backup
menu instead of in the HDD management menu.
1. First please enter “Recording” menu, select “Backup” for SATA1 Disk, then confirm and
restart the device to make the parameter become effective; shown as figure below:
2. Then you’ll find “Backup Today” turn to “Auto Backup” in the “Playback” interface; shown
as figure below:
3. Select “Auto Backup” and enter the submenu shown as below:
To Next Page
Loading...
Need help?
General